POWERFUL, DURABLE AND AFFORDABLE!
Chevrolet Performance’s durable CT350 is the engine budget-conscious racers can depend on for competitive performance and low maintenance. At 350 hp, it is a perfect fit for a large number of short track racers.
It is based on our popular 350 HO high-performance street crate engine and features a strong four-bolt-main block and iron Vortec cylinder heads. A unique dual-pattern camshaft helps deliver more than 300 lb.-ft. of torque between 2,000 and 5,500 rpm – peaking at 396 lb.-ft. at 3,800 rpm. With that much pulling power, you can hold a gear longer, keeping the engine in its sweet spot for quicker laps.
We assemble the CT350 with an 8-quart circle track racing oil pan, balancer, HEI distributor and an aluminum high-rise, dual-plane intake manifold. Add your carburetor, starter, spark plugs, wires and water pump – all available from Chevrolet Performance – and you’ll be ready for the green flag!
Part Number: New P/N 88869602 / Old P/N 19258602
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10105123): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10243070): Forged Steel
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 88894280): Hypereutectic aluminum
Intake Manifold (P/N 12366573): Dual-plane aluminum
Camshaft Type (P/N 24502476): Hydraulic flat tappet
Camshaft Lift (in): .435 intake / .460 exhaust
Camshaft Duration (@.050 in): 212° intake / 222° exhaust
Cylinder Heads (P/N 12558060): Vortec iron; 64cc chambers
Valve Size (in): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.12:1 Nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,500
• Requires addition of carburetor, starter, water pump, plug wires and exhaust system (not included)
• Requires an externally balanced flywheel (not included).
• The 8-quart circle track oil pan is 8 inches deep at the sump. It will clear most GM rear-steer chassis with stock engine location
• For Circle Track Racing only – Not intended for street use
• Circle Track racing engines from Chevrolet Performance include anti-tampering seals installed
NOTE: Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.
Chevrolet Performance Racing Crate Engines are excluded from limited warranty.
*Check track rules for correct application. FREE SHIPPING !
*Drivers name required for IMCA Seals* Add to comments box during checkout
California Proposition 65 Warning